PRESSED PANELS made with FENIX

FENIX 0.9mm sheets can be pressed on to either birch plywood or moisture resistant MDF to produce stunning panels. These are available in a range thicknesses and FENIX pressed either on to both sides (great for internal doors) or FENIX on one side and the matching Arpa HPL balancer on the other side (ideal for cabinetry).

BIRCH PLYWOOD

FENIX can be pressed on either 18mm or 24mm birch plywood resulting in an almost 20mm or 26mm finished panel thickness. The sheet size is 2.430m x 1.220m. These are available in two options:

•  - Double sided panel with FENIX pressed on both sides of the panel
  •  - Single sided panel with FENIX on the good face with a matching Arpa HPL backer on the back face
        *Note - the Arpa HPL backer is a similar colour but different finish to the FENIX. 
    
  • 
    

     

• • MDF

    FENIX can be pressed on either 18mm, 25mm or 30mm moisture resistant MDF resulting in an almost 20mm, 27mm or 32mm finished panel thickness. The sheet size is 3.050m x 1.220m. These are available in two options:

    •  - Double sided panel with FENIX pressed on both sides of the panel
      •  - Single sided panel with FENIX on the good face with a matching Arpa HPL backer on the back face
            *Note - the Arpa HPL backer is a similar colour but different finish to the FENIX. 

PANEL EDGING OPTIONS

•  - Laser ABS edging is available in colour-matched 23mm and 43mm widths x 1.2mm thickness
   - Standard ABS PU edging unglued available in colour-matched 23mm and 43mm widths x
     1.2mm thickness
   - FENIX Colour Core edging in 1.2mm thickness
  
  

• DARK COLOUR DESIGN CONSIDERATION

Putting dark colour benchtops and cabinetry panels into direct sunlight applications can affect the substrate performance in terms of product movement.